Skip to main content

Application Instructions: How to apply Siser EasyWeed on a T-shirt

Application Instructions: How To Properly Iron-On Siser Heat Transfer Vinyl

Application Instructions: HTV Glitter Thermal Iron On Vinyl

Adheres to:

  • 100% polyester
  • 100% cotton
  • Poly/cotton blends
  • Sublimated polyester

Application Instructions:

  1. Cut in reverse or mirror image (the side up will depend on your cutter) Cut on dull side NOT shiny side.
  2. Heat Press Temperature should be 320-350°F.
  3. Place a Teflon sheet or parchment paper over vinyl (purchased separate).
  4. Apply Firm even pressure for 15 – 20 seconds with Heat Press.
  5. Household Iron: Setting on High: 300-350°F for 30 seconds to 1 minute.  Apply Firm pressure.  Don’t forget to place Teflon sheet on top of vinyl film.
  6. Peel Cool

**You can re-press a few seconds if necessary – cover with Teflon sheet.

(It is recommended to do a test piece to correct heat and time setting)

**Don’t forget to apply Teflon sheet over vinyl before pressing at any time.

Care Instructions:

  • Turn garment inside out.
  • Machine wash COLD with mild detergent.
  • NO bleach.
  • Dry at a normal dryer setting on household machines.
  • Do not dry clean.
  • Instructions apply to the vinyl material only, please follow garment washing instructions as well.

Testing: Always test on a fabric swatch prior to production, especially on heavily treated fabrics.

Application Instructions: Thermal Iron On Vinyl - Glow-in-the-Dark

Application Instructions:

  1. Cut in reverse or mirror image (the side up will depend on your cutter) Cut on dull side NOT shiny side.
  2. Heat Press Temp should be 320°F.  Apply medium even pressure for 10-15 seconds. Peel Cool.
    • Household Iron: High setting.  Apply Firm even pressure for 30 seconds to 1 minute. Peel Cool – Always do test piece with household iron as settings may vary
  3. Always use a Teflon sheet or parchment paper over vinyl (purchased separate).
  4.  You can re-press a few seconds if necessary, cover with Teflon sheet

**Don’t forget to apply Teflon sheet over vinyl before pressing.

Washing Instructions:

  • Turn garment inside out.
  • Machine wash COLD with mild detergent.
  • NO bleach.
  • Dry on a cooler than normal dryer setting or Line Dry is BEST.
  • Do not dry clean.
  • Instructions apply to the material only, please follow garment washing instructions as well.

Testing: Always test on a fabric swatch prior to production, especially on heavily treated fabrics.

t-shirt heat vinyl / teflon sheets may be + or – .5 of an inch

Application Instructions: Thermal Iron On Vinyl - Holographic

Adheres to:

  •   100% polyester
  •   100% cotton
  •   Poly/cotton blends
  •   Leather
  •   Sublimated polyester

Application Instructions:

  1. Cut vinyl in reverse or mirror image weed excess material.
  2. Pre heat the press and fabric for 2-3 seconds.
  3. Heat Press set to 320°F – Apply Firm pressure for 10-15 seconds.  Peel clear liner when Cool – Cover with Teflon and heat again for 3 seconds.
  4. Household Iron set to High setting – Apply Firm pressure for 15-30 seconds.  Peel clear liner when Cool – Cover with Teflon and heat again for 3-5 seconds.

**Always do test piece to adjust heat and pressure times with household irons

Washing Instructions:

  • Turn garment inside out.
  • Machine wash COLD with mild detergent.
  • NO bleach.
  • Dry at a normal dryer setting on household machines.
  • Do not dry clean.
  • Instructions apply to the material only, please follow garment washing instructions as well.

Testing:

Always test on a fabric swatch prior to production, especially on heavily treated fabrics.

(Application and Washing Instructions same as Holographic Vinyl)

  • Rainbow is a dual effect translucent film
  • High iridescent “holographic” thermal transfer film
  • Looks pastel on white, with intense metallic effect on dark garments

Teflon Sheet Directions

Directions

Application Instructions:

  1. Cut in reverse or mirror image (the side up will depend on your cutter)   Cut on dull side NOT shiny side.
  2. Heat Press Temp should be 302°F.  Household Iron High setting
  3. Use a Teflon sheet or parchment paper over vinyl (purchased separate).
  4. Apply Medium even pressure for 10 – 15 seconds.
  5. Peel Hot – For printed HTV peel Cool
  6. You can re-press a few seconds if necessary, cover with Teflon sheet

**Don’t forget to apply Teflon sheet over vinyl before pressing.

Care Instructions: 

  • Do not dry clean
  • Machine wash WARM / mild detergent
  • Dry at normal setting
  • No chlorine bleach
  • Wait 24 hours before first wash
  • Turn garment inside out

Shopping Cart